Flex WS1505FR, Operating Instructions Manual

Page: 14 / 48

Long-necked renovation sander WS 1505FR
14
Using the dust extractor
Connect the suction hose to the intake spigot
on the machine:
– Undo the KU nut (A) anti-clockwise,
– Insert the suction hose (B) as far as
possible,
– Retighten the KU nut.
Note!
If required, use the enclosed adapter.
To prevent the power cord from becoming
entangled with the suction hose, fix both
together with the enclosed Velcro strips and
hose clips.
Regularly shake the extractor filter system.
Operating instructions
Danger!
To prevent trapping your hand, do not hold
the machine at the front by the swivel-
mounted sanding head.
– When working, always hold the machine
with both hands.
The machine can be held at any point
along the main tube in order to obtain the
best possible combination of reach and
leverage.
– Before switching on the machine, keep
the sanding head a little distance away
from the surface to be sanded, then
switch on the motor and wait until it
reaches idling speed and the diamond
wheel is at the required circumferential
speed for sanding.
– Place the diamond wheel on the surface
to be sanded.
To prevent the drive mechanism or
diamond wheel from locking or becoming
damaged, do not place the grinding wheel
on excessively large, solid burrs or
workpiece edges.
– Guide the machine by applying light
contact pressure only and working in
overlapping movements (circular or
forwards/backwards) in order to obtain a
good removal rate and prolong the
service life of the tool.
Note!
If contact pressure is excessive, the surface
may be scratched. Do not sand for too long
in one place, otherwise you will dent the
surface.
WS1505FR.book Seite 14 Montag, 25. April 2005 11:29 11