User Guide
5
10 SDA
8 DGND
6 SALERT
4 VI2C
2 SCL
9 NC
7 NC
5 NC
3 NC
1 NC
ROA 128 5068
POL SIP Evaluation Board
1/28701-ROA 128 5068 Rev A
May 2018
© Flex
Fig 1.3b Connection of the Intersil ZLUSBREF02 PMBus-to-USB adapter
(connector is found on the back side of the ROA 128 5068 board)
1.2.1 Power-up instruction:
- Mount the BMR:s in the desired positions
- Connect and turn On the 5-14 V supply
- Turn RC switch in On position
▪
The LEDs should now give green light, (unless the
outputs of the BMRs are not configured to be disabled).
- Connect the PMBus Adapter/Cable to the board.
- Start the software program.
1.2.2 Power-down instruction:
- Turn RC switch in Off position or turn Off the 5-14V Supply
- Now, the BMR modules can be removed/replaced.
9
7
5
3
8
6
4
2
