Angle grinder L3309-115/125/FR, L3410FR/VR, L3325FR
18
115 mm guard
(L3309-115 only)
Danger!
When using the angle grinder for roughing
or cutting, never work without the guard.
1. Pull out the mains plug.
2. Connect the guard to the clamping
flange with the clamping ring by
inserting the cam on the clamping ring
into the groove on the flange.
3. Rotate the guard into the required
position and screw tight.
Safety guard
Danger!
Never remove the safety guard from the
angle grinder.
The safety guard can be adjusted to the job
without a tool through 360° by means of
24 notches.
Caution!
Risk of injury! Wear protective gloves.
1. Pull out the mains plug.
2. Rotate the safety guard away from the
direction-of-rotation arrow on the gear
head (6) until it is in the required
position.
Attaching or changing
the grinding tool
1. Pull out the mains plug.
2. Remove the handle (4) from the power
tool by rotating it in an anti-clockwise
direction.
3. Rotate the cover on the handle by 180°
until it engages.
The stop key is released.
