H 1105 VE/H 1127 VE
16
Do not use a chain or toothed saw blade.
Such insertion tools frequently cause
a kickback or the loss of control of the electric
power tool.
Additional safety instructions
It is not recommended to sand lead paint.
Lead paint should be removed by
a specialist only.
Do not work on materials which release
hazardous substances (e.g. asbestos).
Take precautions if hazardous, combustible
or explosive dust is likely to occur.
Wear protective dust mask. Use dust
extraction system.
When working, hold the electric power tool
firmly with both hands and ensure that you
have a secure footing. The electric power
tool is controlled more securely if held with
both hands.
Do not use the electric power tool if it has
a damaged power cord. Do not touch the
damaged power cord and pull out the mains
plug if the power cord is damaged during
work. Damaged power cords increase the
risk of an electric shock.
a^j^db=ql=molmboqv>
The mains voltage and the voltage
specifications on the rating plate must
correspond.
Noise and vibration
The noise and vibration values have been
determined in accordance with EN 60745.
The A evaluated noise level of the power tool
is typically:
Total vibration value (when grinding metal
surfaces):
t^okfkd>
qÜÉ=áåÇáÅ~íÉÇ=ãÉ~ëìêÉãÉåíë=êÉÑÉê=íç=åÉï=
éçïÉê=íççäëK=a~áäó=ìëÉ=Å~ìëÉë=íÜÉ=åçáëÉ=~åÇ=
îáÄê~íáçå=î~äìÉë=íç=ÅÜ~åÖÉK
klqb
The vibration emission level given in this informa-
tion sheet has been measured in accordance with
a standardised test given in EN 60745 and may
be used to compare one tool with another. It may
be used for a preliminary assessment of expo-
sure. The declared vibration emission level
represents the main applications of the tool.
However if the tool is used for different applica-
tions, with different accessories or poorly
maintained, the vibration emission may differ.
This may significantly increase the exposure level
over the total working period. For a precise
estimation of the vibration load the times should
also be considered during which the power tool is
switched off or even running, but not actually in
use. This may significantly decrease the exposure
level over the total working period. Identify addi-
tional safety measures to protect the operator
from the effects of vibration such as: maintain the
tool and the accessories, keep the hands warm,
organisation of work patterns.
`^rqflk>
tÉ~ê=É~ê=éêçíÉÅíáçå=~í=~=ëçìåÇ=éêÉëëìêÉ=
~ÄçîÉ=UR=Ç_E^FK
Sound pressure
L
pA
[dB(A)]
Sound power
L
WA
[dB(A)]
H 1105 VE
86
97
H 1127 VE
90
101
Uncertainty K = 3 dB
Emission value a
h
[m/s
2
]
H 1105 VE
3.1
H 1127 VE
3.2
Uncertainty
K [m/s
2
]
1.5
1.8
