-13-
OPERATING INSTRUCTIONS
WARNING
To reduce the risk of fire,
personal injury, and
product damage due to a short circuit, never
immerse your tool, battery pack or charger
in fluid or allow a fluid to flow inside them.
Corrosive or conductive fluids, such as
seawater, certain industrial chemicals, and
bleach or bleach-containing products, etc. can
cause a short circuit.
WARNING
If any parts are damaged
or missing, do not operate
this product until the parts are replaced.
Use
of this product with damaged or missing parts
could result in serious personal injury.
WARNING
Do not attempt to modify
this tool or create
accessories not recommended for use with
this tool. Any such alteration or modification is
misuse and could result in a hazardous
condition leading to possible serious injury.
WARNING
To prevent accidental
starting that could cause
serious personal injury, always remove the
battery pack from the tool when assembling
parts.
WARNING
Always wear safety goggles
or safety glasses with side
shields during power tool operation. If the
operation is dusty, also wear a dust mask.
WARNING
Wear protective gloves.
This multi tool must be used only with the battery packs and chargers listed below:
Battery Pack
Charger
2.5Ah
5Ah
8Ah
12Ah
FLEX FX0111
FLEX FX0121 FLEX FX0221 FLEX FX0231
FLEX FX0411
FLEX FX0421
NOTICE: Please refer to the battery pack and charger manuals for detailed operating
information.
ON/OFF SWITCH (FIG. 11)
Hold the tool firmly within the soft grip area and
keep your hands away from the blade.
To turn the multi-tool on, push the On/Off switch
forward.
To turn it off, move the On/Off switch toward the
rear.
WARNING
After tool use, detach the
battery pack to prevent
accidental starts and possible injury.
Fig. 11
Turn on
Turn off
