Rotational laser
18
Technical specifications
* depending on the ambient light
Supplied components
Rotational laser ALR 512 including battery
pack
Remote control including 9 V unit
FR44 receiver including batteries
Retaining clamp for receiver
Wall and floor support for ALR
Adapter for vertical application
Battery charger for battery pack
Battery housing for ALR
Transportation case
Operating instructions
Before switching on the
power tool
Unpack the power tool and check that the
delivery is complete and not damaged.
Before using the power tool for the first time
–
Charge the battery pack,
–
Insert the battery into the remote control,
–
Insert the batteries into the receiver.
Charging the battery pack
Note
If the LED (11) flashes, charge the battery
pack. While the power tool is operating with
the rotating laser beam, only the rotation
switches off, the laser beam remains on.
n
Connect the battery charger to the
socket (5).
n
Connect the battery charger to the
power supply.
The LED (6) is lit red.
The charging time for a fully discharged
battery pack is approx. 12 hours. During the
charging process the power tool should be
switched off.
Mains mode
The power tool can continue to be used with
the battery charger in mains mode. To do
this, connect the battery charger as
described above.
Order number
329.452
Visible laser diode
635 nm
Laser class
2
Precision
±1 mm/10 m
Self-levelling range
(horizontal)
±5°
Range:
– With receiver FR44
< 600 m
– Without receiver
approx.
50 m*
– Remote control
approx.
50 m*
Speed of rotation
600/min
Operating duration
– ALR with NiMH battery:
– ALR with alkali battery:
– Receiver FR44:
30 h
60 h
400 h
Weight (ALR with battery
pack)
1.95 kg
Dust/water protection
IP 56
Temperature range
–20 °C.....
+50 °C
ALR512.book Seite 18 Mittwoch, 18. Januar 2006 9:57 09
