PE 8-4 80
17
Operating instructions
WARNING!
Before carrying out any work on the
polisher, always pull out the mains plug.
Before switching on the power tool
Unpack the polisher and check that there
are no missing or damaged parts.
Attach handle cover
Loosen screws or handle.
Push on handle cover (1.).
Tighten screws (2.).
Switching on and off
Brief operation without engaged switch
rocker
Push the switch rocker forwards and hold
in position.
To switch off the power tool, release the
switch rocker.
Continuous operation with engaged
switch rocker
Push the switch rocker forwards and
engage by pressing the front end.
To switch off the power tool, release the
switch rocker by pressing the rear end.
Preselecting the speed
To set the operating speed, move the dial
to the required value.
CAUTION!
Risk of injury due to destruction of the tool.
Use the appropriate tool for the job.
NOTE
If an overload or overheating occurs during
continues operation, the power tool auto-
matically reduces the speed until the power
tool has cooled down adequately.
