RETRACTS AND GEAR SEQUENCER OPERATION
The following steps will be required EACH time the aircraft is powered for flight:
1. Ensure your radio has CH5 (Gear) assigned to a 2-position switch and is set to 125% travel.
2. Hold the F-100D Super Sabre in a manner that the gear doors and retracts are unobstructed and free to close and open.
3.
Test the retracts. Ensure the gear/door opens and closes without binding or stalling the servos. Adjust ball link as necessary
for the door to function properly. When satisfied with the result, power off the aircraft.
4.
To arm the retracts, cycle your transmitter’s CH5/Gear switch from
down to up, then down again waiting about 1 second
in each position.
Please note, CH5/Gear can be reversed in the transmitter for user preference.
NOTICE
The nose gear door should come set up from the factory. However, it is a good idea to double check the function
and verify the servo is not binding when closed. Adjust the ball link on the door by threading in or out as
necessary.
