21
LIMITED WARRANTY
Warranty Coverage
Flex Innovations, LLC. and its authorized resellers (“Flex”) warrant to
the original purchaser that the product purchased (the “Product”) it
will be free from defects in materials and workmanship at the date of
purchase.
Outside of Coverage
This warranty is not transferable and does not cover:
(a) Products with more than 45 days after purchased date.
(b) Damage due to acts of God, accident, misuse, abuse,
negligence, commercial use, or due to improper use,
installation, operation or maintenance
(c) Modification of or to any part of the Product.
(d) Product not compliant with applicable technical
regulations.
(e) Shipping damage.
(f )
Cosmetic damage
OTHER THAN THE EXPRESS WARRANTY ABOVE, FLEX MAKES NO OTHER
WARRANTY OR REPRESENTATION, AND HEREBY DISCLAIMS ANY AND
ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE
IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. THE PURCHASER
ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED THAT THE
PRODUCT WILL SUITABLY MEET THE REQUIREMENTS OF THE
PURCHASER’S INTENDED USE.
Purchaser’s Solution
Flex’s sole obligation and purchaser’s sole and exclusive remedy shall
be that Flex will, at its option, either (i) service, or (ii) replace, any
Product determined by Flex to be defective. Flex reserves the right to
inspect any and all Product(s) involved in a warranty claim. Service or
replacement decisions are at the sole discretion of Flex. Proof of
purchase is required for all warranty claims. SERVICE OR
REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE
PURCHASER’S SOLE AND EXCLUSIVE REMEDY.
Limitation of Liability
FLEX SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR
COMMERCIAL LOSS IN ANY WAY, REGARDLESS OF WHETHER SUCH
CLAIM IS BASED IN CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT
LIABILITY OR ANY OTHER THEORY OF LIABILITY, EVEN IF FLEX HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Further, in no event shall the liability of Flex exceed the individual
price of the Product on which liability is asserted. As Flex has no
control over use, setup, assembly, modification or misuse, no liability
shall be assumed nor accepted for any resulting damage or injury. By
the act of use, setup or assembly, the user accepts all resulting
liability. If you as the purchaser or user are not prepared to accept
the liability associated with the use of the Product, purchaser is
advised to return the Product immediately in new and unused
condition to the place of purchase.
Law
These terms are governed by Florida law (without regard to conflict
of law principals). This warranty gives you specific legal rights, and
you may also have other rights which vary from state to state. FLEX
RESERVES THE RIGHT TO MODIFY THIS WARRANTY AT ANY TIME
WITHOUT PRIOR NOTICE.
Questions & Assistance
Visit
www.flexinnovations.com/flex-dealers
for customer support
in your region.
Inspection or Services
If this Product needs to be inspected or serviced and is compliant in
the region you live and use the Product in, please contact your
regional Flex authorized reseller. Pack the Product securely using a
shipping carton. Please note that original boxes needs to be
included, but are not designed to withstand the rigors of shipping
without additional protection. Ship via a carrier that provides
tracking and insurance for lost or damaged parcels, as Flex is not
responsible for merchandise until it arrives and is accepted at our
facility.
Warranty Requirements
For Warranty consideration, you must include your original sales
receipt verifying the proof of purchase date. Provided warranty
conditions have been met, your Product will be replaced free of
charge. Shipping charges are as follow: to Flex by customer, Flex out
it is by Flex. Service or replacement decisions are at the sole
discretion of Flex.
COMPLIANCE INFORMATION FOR THE
EUROPEAN UNION
Declaration of Conformity (In accordance with ISO/IEC
17050-1)
Product(s):
Mamba 10 G2 Super PNP
Item Number(s):
FPM4270A
The object of declaration described above is in conformity with the
requirements of the specifications listed below, following the
provisions of the EMC Directive 2004/108/EC.
EN 55022: 2010+AC: 2011
EN 55024: 2010
EN 61000-3-2: 2006+A2:2009
EN 61000-3-3: 2013
EN 61000-6-3: 2007/A1:2011
EN 61000-6-1: 2007
Instructions for disposal of WEEE by users in
the European Union
This product must not be disposed of with other waste.
Instead, it is the user’s responsibility to dispose of their
waste equipment by handing it over to a designated
collections point for the recycling of waste and electronic
equipment. The separate collection and recycling of your
waste equipment at the time of disposal will help to
conserve natural resources and ensure that it is recycled
in a manner that protects human health and the
environment. For more information about where to drop
o
ff
your waste equipment for recycling, please contact
your local city o
ffi
ce, your household waste disposal
service or where you purchased the product.