background image

Important Notes 

 

• Assemble the exerciser as per assembly instructions 

and be sure to only use the structural parts provided 

with the exerciser and designed for it. Prior to the 

assembly, make sure the content of the delivery is 

complete by referring to the parts list of the assembly 

and operating instructions. 

 

• Be sure to set up the exerciser in a dry and even place 

and always protect it from humidity. If you wish to 

protect the place particularly against pressure points, 

contamination, etc., it is recommended to put a suitable, 

non-slip mat under the exerciser. 

   

• The general rule is that exercisers and training devices 

are no toys. Therefore, they must only be used by 

properly informed or instructed persons. 

   

   

 

• 

Stop your work-out immediately in case of dizziness, 

nausea, chest pain or any other physical symptoms. In 

case of doubt, consult your physician immediately.

 

 

• Children, disabled and ha

n

dicapped persons should 

use the exercise only under supervision and in 

presence of another person who may give support and 

useful instructions. 

 

• Be sure that your body parts and those of other persons 

are never close to any moving parts of the exerciser 

during its use. 

 

• When adjusting the adjustable parts, make sure they 

are adjusted properly and note the marked, maximum 

adjusting position, for example of the saddle support, 

respectively. 

   

• Do not work out immediately after meals!  

 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for KH-711RD

















Reviews: