FLENDER DX2000+, Operating Instructions Manual

Page: 60 / 82

Maintenance
8.2 Care of the control cabinet or DX site server
60 Edition 10/2022 S6300-01en
Replacement parts to be used must comply with the technical requirements specified by
Flender. This is always guaranteed with original replacement parts.
8.2 Care of the control cabinet or DX site server
8.2 Care of the control cabinet or DX site server
Caring for the control cabinet and the DX Site-Server is limited to a weekly clean-
ing of all surfaces from dust and other residues.
NOTICE
Material damage due to improper cleaning
Improper cleaning of the control cabinet or DX site server can lead to malfunc-
tions and damage.
• Do not select an aggressive cleaning agent that attacks metal and plastic surfaces as
well as hose connections.
• Do not clean sensitive components with coarse brushes and strong mechanical pres-
sure. Do not use linting cleaning cloths.
• Do not clean the control cabinet and DX Site-Server with a water jet or high-
pressure cleaner.
Appropriate care helps to maintain the control cabinet and DX Site-Server and
keep them in a functional condition in the long term.
• Remove dust from the outside of the control cabinet and DX Site-Server with
dry blowing air (< 5 bar) or suction air with the aid of a brush. Do not forget the surface
of the roof plates above.
• Carefully clean the ventilation attachments of the fields and ventilation slots of the doors
with suction air only, so as not to blow the dust inside the panel.
• In case of heavy contamination, dismantle the ventilation attachment and clean the indi-
vidual parts.
Cleaning inside
DANGER
Danger to life due to electric shock
Electric shock results in fatal injuries.
• Before carrying out any repair, set-up, cleaning or maintenance work, switch off the
power to the control cabinet via the mains disconnection device.
• Secure the control cabinet against being switched on accidentally.
• Lock the mains disconnection device and put up warning signs.
• If available, also trigger an emergency stop button.
• Ensure that the inside of the control cabinet or DX Site-Server is only
cleaned by a qualified electrician or a person undergoing training in electrics who is
under the supervision of a qualified electrician.
• Switch off the mains disconnection device.
• After external cleaning, open the doors of the panels.