02
1. Introduction
1.1 Safety
The Heavy Duty Industrial Blenders are machines simple to use and to clean.
However for your safety read the following instructions in order to avoid accidents:
1.1.1 Always unplug the machine when cleaning, servicing or when any other operation is needed.
1.1.2 Never use tools that do not belong to the machine during operation.
1.1.3 Before using the machine check if Cup Nº02 (Pic.01) is properly fitted in its position.
1.1.4 Never throw water directly to the machine.
1.1.5 Keep hands off turning parts.
1.1.6 Do not operate the machine wearing wet clothes or wet shoes.
1.1.7 Before operating the machine be sure it is grounded properly.
1.1.8 Take good care of this manual and have it handy for use at any time.
1.2 Main Components
All components are made with carefully selected materials, in accordance with
Siemsen experience and standard testing procedures.
Picture - 01
1-Lid
2-Cup
3-Cup Flange
4-Motor Support Flange
5-Motor Housing
6-Base
7-Voltage Selector Switch110/220V
8-On/Off Switch
01
02
03
05
07
08
04
06
07
4.3.1 Advice
When checking the tension of the belts or chains, DO NOT introduce your fingers
between the belts and the pulleys and nor between the chain and the gears.
4.3.2 Precautions
Check if motors and sliding or turning parts of the machine produce abnormal
noises.
Check the tension of the belts and chains and replace the set when belt or chain
show signs of being worn out.
When checking tensions of belts or chain DO NOT introduce your fingers between
belts and pulleys, nor between the chains and gears.
Check protections and safety devices to make sure they are working properly.
4.3 Routine Inspection
4.4.1 Advice
Be sure your hair is not loose in order to avoid getting caught by turning parts
which could lead to a serious accident. Tie your hair well up and/or cover your head with a scarf.
The operation performed by not trained or skilled personnel shall be forbidden.
Never touch turning parts with your hands or in any other way.
NEVER
operate machine without all original safety devices under perfect
conditions.
4.4 Operation
4.5After Finishing The Work
4.5.1 Precautions
Always TURN THE MACHINE OFF by removing the plug from the socket
before cleaning the machine. Never clean the machine unless it has come to a complete stop. Put all
components back to their functional positions before turning it ON again. Check level of oil. DO
NOT place your fingers in between belts and pulleys nor chains and gears.
4.6 Maintenance
4.6.1 Danger
Any maintenance with the machine in working situation is dangerous. TURN IT
OFF BY PULLING THE PLUG OFF THE SOCKET DURING MAINTENANCE.
Summary of Contents for L - 02
Page 2: ......
