Copyright © Fleet Hoster. 2021 – All Rights Reserved | www.fleethoster.com 5
•
Installation
•
Mount away from emission source such as all kinds of sensors, burglar alarm
and other communication devices.
•
Mount so solar panel is in view of sunlight.
•
Tracker Operation
•
Physical power on or off.
•
Turn the power switch to on or off position.
•
Physical power off is recommended when the tracker is stored in the
warehouse.
•
Motion Operations
Hold the tracker and keep the indicator LED side towards the sky. Use normal speed
to turn it over 180°(the solar panel side towards the sky) then recover. This is called
onetime standard turning. By repeating the standard turning 3 times, the tracker
will show GNSS, network and battery status through indicator LED. It only works
when physical power switch is at on position.
•
The Battery
•
Place the tracker solar panel side on the desk.
•
Recommend connecting the device to a 5V 1A (cellphone) adaptor through
magnet USB cable for 20 hours charging to make sure the battery is fully
charged.
•
Customer also can connect the tracker to other USB connectors, but lower
current output will cause longer charging time.
•
When the battery voltage value drops to 3.5V, usually a battery charging is
needed to avoid unexpected shutdown due to low power. If the battery runs
out completely, only when the battery is charged to 3.5V, the device will power
on again.
