PREPARING YOUR APPLIANCE FOR USE
YOU CANNOT BREW BEVERAGES IF YOU HAVE NOT PRIMED THE
APPLIANCE FIRST!
The priming cycle fills the boiler with water. After this your appliance
will be ready to use.
Remove the Water Reservoir from the machine.
Remove the Lid. Inside you will find a Water Filter. Remove the
Filter from its packaging and install, small end first, by pushing it
firmly into the round location at the bottom of the Water
Reservoir.
Fill the Water Reservoir with cold water up to the MAX indication
line and put it back on to the appliance. Replace the Lid.
Put the Plug into a 120V AC electrical outlet.
Put the Drip Tray onto the appliance in the position indicated.
Ensure the Pack Door is closed and the Brew Head is in the down
position.
DO NOT fit the Cup Stand at this stage.
6