Supplied By www.heating spares.co Tel. 0161 620 6677
m)
Refit the front burner heat shield to the sides of the fire box (2 Screws)
and secure the linear trim to the fire using the magnets
provided.
n)
Before making the final gas connection, thoroughly purge the gas
supply pipework to remove all foreign matter, otherwise serious
damage may be caused to the gas control valve on the fire
.
The other firebox fixing method is as follows :-
In installations where the cable method is not suitable (e.g. loose masonary in rear
of fire opening) the firebox can be secured to the fire surround using four screws
and wall plugs provided. Below (fig.9) is a diagram to indicate the hole centre
positions available on the firebox to facilitate the screw fixing to the fireplace /
surround.
Fig. 9
On Linear models, the installer must fit the ashpan knob to the ashpan using
the fixing screw provided. The ashpan is packed in the side fittings of the
main packaging.
260mm
37mm
532mm
425mm
Firebox
Mounting
Flange
15