Supplied By www.heating spares.co Tel. 0161 620 6677
sitting against the support bracket as shown.
REMOVAL / REPLACEMENT OF THE LIGHTBULBS
a)
Isolate the appliance from the electricity supply.
b)
Remove the coal form as shown on page 16, Fig 7 of the Installation
Instructions.
c)
Remove the bulbs from the bayonet fitting and replace with a new one
of the correct specification, as shown below in Fig. 4
Due to our policy of continual improvement and development the exact
accuracy of descriptions and illustrations cannot be guaranteed.
Part no. B-77280
Issue 2
CFM Europe Ltd
Trentham Lakes
Stoke-on-Trent
Staffordshire
ST4 4TJ
Telephone - General Enquiries :
(01782) 339000
Telephone - Service :
(08700) 101187
Bayonet Fitting
Fig. 4
