CLEANING - WARNING
Before attempting any cleaning operation ensure that the fire has been allowed to
fully cool.
CLEANING THE STAINLESS STEEL AND PAINTED METAL PARTS
The “Curve” fascia that was supplied with this product must only be cleaned with a
clean, damp cloth.
Abrasive cleaners, chemical cleaning agents or any type of polish must
never be used as damage to the finish may result.
CLEANING THE RIBBED FIBRE BACK
We do not recommend cleaning of the ribbed ceramic fibre back as this is a fragile
item and damage may result.
None of these parts must be washed or exposed to any cleaning agents or
water
.
Any damaged parts must be replaced by contacting your dealer or telephoning
BFM Europe Ltd. on the number stated on the rear cover of this book. The
ribbed ceramic fibre back must only be replaced with a complete and genuine item
and the fire must never be run with a damaged item in position.
The ceramic fibre back used in this product is manuafctured from R.C.F
(Refractory Ceramic Fibre) To ensure that the release of fibres from this item
is kept to a minimum, during installation and servicing we recommend that
you use a HEPA filtered vacuum to remove any dust accumulated in and
around the appliance before and after working on the appliance. When
replacing these articles we recommend that the replaced items are not
broken up, but are sealed within heavy duty polythene bags, clearly labelled
as “RCF waste”. RCF waste is classed as a “stable”, non reactive
hazardous waste and may be disposed of at a landfill licensed to accept
such waste Protective clothing is not required when handling these
articles, but we recommend you follow the normal hygiene rules of not
smoking, eating or drinking in the work area, and always wash your hands
before eating or drinking.
8