h)
Do a final check that the coals are layed out as shown below in Fig. 11
Fig. 11
The exact position and fit of the coals may be very finely adjusted to give the most
pleasing and random appearance.
Warning : Use only the coals supplied with the fire. When replacing the
coals remove the old coals and discard them. Fit a complete set of
coals of the correct type. Do not fit additional coals or any coals
other than a genuine replacement set.
To ensure that the release of fibres from these R.C.F (Refractory Ceramic
Fibre) articles is kept to a minimum, during installation and servicing we
recommend that you use a HEPA filtered vacuum to remove any dust
accumulated in and around the appliance before and after working on the
appliance. When replacing these articles we recommend that the replaced
items are not broken up, but are sealed within heavy duty polythene bags,
clearly labelled as “RCF waste”. RCF waste is classed as a “stable”, non
reactive hazardous waste and may be disposed of at a landfill licensed to
accept such waste Protective clothing is not required when handling these
articles, but we recommend you follow the normal hygiene rules of not
smoking, eating or drinking in the work area, and always wash your hands
before eating or drinking.
i.)
Replace the glass panel and retaining trims as described on
pages 10 & 11
NEVER USE THE FIRE WITHOUT THE GLASS PANEL IN POSITION, OR IF
BROKEN OR CRACKED.
FR
FR
FR
FR
S
S
L
L
L
L
L
S
S
S
S
L
L
L
L
53
