P.06
Operating Manual
O u t p e r f o r m . O u t l a s t .
Initial setting / installation
1. Unpack your Slimline Plasma ceiling TV lift and place the Slimline on a level surface.
2. Align the 4 ceiling mounting brackets with the section as shown on page 07,
image
1, No. 2 in a way
that these fit your project optimally. You can displace the mounting brackets simply as you wish until
these have reached the ideal position. Afterwards, please screw the brackets to the section by means
of the screws provided (DIN 912 M8, SW6) using an Allen wrench.
3. Now, transfer the dimension of the hole centre distance of the mounting brackets to your prepared
ceiling recess (S.07,
image
1, No. 1). Use a drill (d = 8mm) to drill into your ceiling material. In case
the Slimline ceiling lift is to be installed on a yacht with metal/aluminium ceiling, we recommend dril-
ling a hole having the size suitable for a screw M8 (recommended drill/core hole diameter = 6.8mm).
In case of concrete ceiling installation please use mounting anchors approved for being used with
cracked respectively non-cracked concrete. We recommend using mounting anchors of the company
Fischer. In case the installation is implemented with a wooden ceiling, you may install the Slimline lift
to the wooden ceiling using wood screws (DIN 512, d = 8mm). The anchor respectively screw length
should be at least 80mm for concrete or wooden ceiling installations.
4. Please attach your Slimline to the ceiling using the 4 mounting brackets (page 07,
image
1, No. 1).
5. Now, align the 2 vertical supports in the Slimline flap with the VESA attachment dimension of your
plasma / LCD TV, as shown in figure 2. In order to be able to move the supports, you have to loosen
the DIN 912 screws using an Allen wrench (page 08,
image
2, No. 3, SW 4). In doing so, the supports
can be displaced horizontally to the dimension of the hole centre distance of the TV correspondingly.
Once you have reached to desired distance, retighten the screws. Now, you transfer the hole centre
distance from the X axis to the Slimline flap. Please observe that the holes of the X axis have been
transferred to the section in a centred manner.
6. Now, you can transfer the coordinates of the Y axis of the TV mounting holes to the Slimline flap.
During this step you will have the opportunity to align the TV upwards or downwards as the customer
desires.
7. After you transferred all hole coordinates to the Slimline flap, you can centre punch the same now and
drill the holes using a drill corresponding to the size of the screws (see page 08,
image
3, No. 4). As
there is no applicable standard for these mounting screws, we are not able to recommend an exact
drilling diameter. The screws for wall-mounted TV sets may vary between M6 and M10 in dependency
on the TV model. Please consult the Flatlift distribution department prior to ordering the product res-
pectively procure the suitable screws with the local screw dealer.
INITIAL PRODUCT SET UP
C.04: