FlashPoint FPLFSMZ, Manual

Page: 12 / 20

11
The Sync Cord Jack (7) is a Φ3.5mm plug. Insert a trigger plug here
and the flash will be fired simultaneously with the camera shutter.
13.Sync Triggering
14. Custom Function----Sleep Function
This product is equipped with Sleep
Function to avoid battery drain
when the flash unit is idle.
Press button and hold for 2
seconds to enter the sleep time
adjustment Mode. The LCD panel
displays “SL” (Sleep) and “Sleeping
Time”. Idle time before entering
Sleep Mode is 10 minutes by
default. Rotate Select Dial to
set a desired time for the flash or to
turn off Sleep Function.
Press button to return.
The flash unit features a Wireless Control Port (6) so that
you can wirelessly adjust the power level of the flash
and even disable it, focus assist beam and Recycle Beep,
as well as trigger the flash.
To control the flash wirelessly, you need a Flashpoint R1
series remote control set (Transmitter and Receiver).
Insert its receiver into the Wireless Control Port (6)
on the flash and insert the Transmitter onto
the camera hot shoe. Settings
made on the hotshoe-mounted
Transmitter will be wirelessly
communicated to the flash. Then
you can press the camera
shutter-release button to trigger
the flash. You can also hold the
Transmitter in your hand to
control your off-camera flash.
12. R1 Wireless Control Function
For full instructions on the use of R1 series remote control, see
its user manual.