Inventor
Ⅱ
User Guide | www.flashforge.com
400-699-1063
58
done.
Print When Slice Done:
If you print via USB cable, you can check the box, while if
you print via USB stick, you should not check the box.
Machine Type:
FlashForge Inventor
Ⅱ
Supports:
If you print a model with supports, you should click the inverted triangle
and select
[Enable]
.
Raft:
You are suggested to select
[Enable]
.
Resolution:
You are suggested to select
[Standard]
More Options:
You are suggested to keep them default.
Click
[OK]
to select the path to save the Gcode file. You can rename the file as you
like and save it as a .g or .gx file, click
[Save]
to generate a Gcode file.
Note
: .gx files are available for preview while the .g files are not. They are displaying
as follows:
g. Files
gx. Files
7-7
Next, we are going to print the model.
7.2 Print Methods
After generating the Gcode file, you can transfer it to your Inventor
Ⅱ
. You can
transfer the file through USB cable and USB stick.
7.2.1 Print from Computer (USB connection)
①
Connect your Inventor
Ⅱ
with your PC via a USB cable.
②
Turn on your Inventor
Ⅱ
, level the build plate and load the filament.