Guider
Ⅱ
User Guide | www.flashforge.com
400-699-1063
47
Cooling Fan Control:
Set up the time to turn on the cooling fan. You can
pre-set the height and make the cooling fan begin to work at the point.
Pause At Heights:
Allows users to pre-set a height in which the print will
suspend automatically. The function usually applied when you want to change the
filament at a certain point.
(6-14) Click
[Edit]
, then you can add or remove a height.
6.2.11 File Menus
①
New Project
Click
[
File
]
--
[
New Project
]
can build a blank project. If there is an unsaved
modification on previous project, then it will inform you whether the modification
needs to be saved or not. Click
[
Yes
]
will save the modification, while click
[
No
]
will
abandon it. If click
[
Cancel
]
or close tool tip, then will cancel the new project.
②
Saving
After finishing the model edit and adjustment, there are two ways below to save all
models in the scene.
Method 1:
6-15
6-14
