Flashforge Foto 13.3, Quick Start Manual, Page: 20 / 23

19
4. Click the [Settings] and the pop-up window will appear. Generally, it is enough
to adjust the ‘Layer Height’, ‘Bottom Layer Count’, ‘Exposure Time’, and ‘Bottom
Exposure Time’.
5. After all parameters being set, click the [Slice] and a tip ‘Slicing’ will show at the bottom
right of the interface. When the slicing is done, a preview interface will display.
6. Click the [Save] to save the file type as ‘.svgx’ ; choose the folder and click [Save].
Settings
Default
FLASHFORGE Standard Resin Grey for 0.1mm
foto 13.3
foto 8.9
foto 6.0
Machine
Lay er Height：
Bottom Lay er Count：
Exposur e Time：
Exposur e Time：
Exposur e Time：
Bottom Exposur e Time：
Light-o ff Delay：
Bottom Light-o ff Delay：
mm
s
s
mm
mm
mm/min
mm/min
mm/min
10
10
65
65
150
0.1
1
8
Linear
6
80
s 0
s
0
Bottom Lif t Distance：
Lif ting Distance：
Bottom Lif t Speed：
Lif ting Speed：
R etract Speed：
Resin Print Gcode Advanced
Save
Network Sending
Machine：
R esin：no rmal
V olume：1.8 (ml)
W eight：2.0 (g)
Price：0.05$
Time：3h15m0s
Back
CHITUBOX V1.8.1 untitled*