Dreamer NX User Guide | www.flashforge.com
36
④
Show Model Outline
Click
[View]
--
[Show Model Outline]
, it will highlight the yellow border of the
object
⑤
Show Steep Overhang
Click
[View]
--
[Show Steep Overhang]
. When the intersection angle between
the model surface and horizontal line is within the overhang threshold value,
the surface has steep overhang and it becomes red in the software. Overhang
threshold value could be set as needed. The default value is 45 degree.
6.2.5
Move
Select the object and move the object by the following two methods:
Method 1: Click the
[Move]
icon on the left, Long press the left mouse button
and drag to adjust the location of the model in XY direction. Long press the
Shift
key and the left mouse button, drag to adjust the location of the model in
Z direction. The distance and the direction of the movement shall be displayed.
Method 2: Click the
[Move]
button on the left and then enter the distance
value. Click
[Reset]
to reset distance values.
Note: Users shall click
[Center]
and
[On Platform]
after the location
adjustment to ensure the model(s) be within the build area and on the build
platform. If a specified position is needed, only click
[On Platform]
.
6.2.6
Rotate
Select the target object and rotate the object by the following two methods:
Method 1: Click the
[Rotate]
icon on the left and three mutually perpendicular
rings appear around the object. Click one ring and rotate on the present axis,
you will see the rotation angle and direction in the center of circle. In this way,
