FlashCut CNC
FlashCut CNC
Section
Section 1
1 Getting Started
Getting Started
2
2
System Safety
If you do not understand and agree with all of the above safety
guidelines, do not use this product.
1.
Never let the machine run unattended.
2.
Any person near a running machine tool must wear safety goggles.
3.
Allow only trained people to operate the machine. Anyone
operating this machine must have:
•
Knowledge of machine tool operation.
•
Knowledge of personal computer operation.
•
Knowledge of microsoft windows.
•
Good common sense.
4.
Place safety guards around the machine to prevent injury from
flying objects. FlashCut CNC highly recommends building a
plexiglass safety shield around the entire tool envelope.
5.
A computer controlled machine tool is potentially dangerous.
Unexpected machine movement can occur at any time. Never
place any part of your body within the tool envelope while the
machine is online.
6.
Be aware and on alert for computer crashes at all times.
7.
Always keep the tool envelope tidy and free of any loose objects.
8.
FlashCut CNC is not responsible for the safe installation and use
of this product. You and only you are responsible for the safety of
yourself and others during the operation of your CNC machine
tool. FlashCut CNC supplies this product but has no control over
how it is installed or used. Always be careful!
When running any machining operation, safety is of utmost
importance. For proper and safe use of the FlashCut CNC program
and your CNC machine, the following safety guidelines must be
followed:
