.
Use the
UP/DOWN
buttons to set to
AU01
or
AU02 ,
Press
ENTER
to confirm.
Setup single-desk light`s autocephaly moving mode(sound control)
.
Press the
MENU
button until it shows
SNOF
.
.
Use the
UP/DOWN
buttons to set to
SNOF
,press
ENTER
to confirm.
Master/slave mode(auto-running
、
sound control)
.
This mode will allow you to link up 32 units together without a controller.
.
Use standard DMX cables to daisy chain your units together via the DMX connector
on the rear of the units.Proper performance it may be necessary to use a terminator
at the last fixture. For more information about terminators..
Set the desired master-
mode-
“Automatic program mode” or”sound controlled
mode
”, for the master-device, send the DMX address 1 for all slave-devices. Please
refer to the instruction under control board.
To set the pan to reverse
.
Press the
MENU
until it shows
RPOF
.
.
Use the
UP/DOWN
buttons show
RPON
, press
ENTER
to confirm.
To set the tilt to reverse
.
Press the
MENU
until it shows
RTOF
.
Use the
UP/DOWN
buttons show
RTON
, press
ENTER
to confirm.
To set the LED readout to 180
°
,rotating
.
Press the
MENU
until it shows
RDOF.
.
Use the
UP/DOWN
buttons show
RDON
, press
ENTER
to confirm.
Resume reverse Windows default
.
Press the
MENU
until it shows
DFON
.
.
press
ENTER
to confirm
。
DMX mode
This mode allows the unit to be controlled by any universal DMX controller.
The default mode for the fixture is DMX, as follows
4.4 DMX channel v alues
Channel
Value
Function
1
0-255
Pan
Pan movement
2
Tilt
