Disconnect the power cord before replacing a fuse and always replace with the
same type fuse.
Maximum ambient temperature (Ta) is 104
℉
(40
℃
). Do not operate fixture at
temperature higher than this.
In the event of a serious operating problem, stop using the unit immediately. Never try
to repair the unit by yourself. Repairs carried out by unskilled people will lead to
damage or malfunction. Please contact the nearest authorized technical assistance
center. Always use the same type spare parts.
Don
’t connect the device to a dimmer device.
Make sure the power cord never crimped or damaged.
Never disconnect the power cord by pulling the cord.
Avoid directing eye exposure to the light source while it is on.
2. Introduction
2.1 Features
12 channel DMX-512 .
Pan :630
°
/tilt:270
°
.
Variable electronic strobe.
Variable electronic dimmer(0-100%).
LED display menu with invert.
Reset to factory settings option.
Pan/tilt invert option.
Fan cooled.
2.2
DMX Channel
Channel
Function
1
Pan
2
Tilt
3
Pan/Tilt Speed
4
Red
5
Green
6
Blue
7
White
8
Mix color
9
Strobe and Reset
10
Dimmer
11
ZOOM
12
Pan Fine
13
Tilt Fine
3. Setup
3.1 Fuse replacement
With a flat head screwdriver wedge the fuse hold out of its housing. Remove the
damaged fuse from its holder and replace with exact same type fuse. Insert the fuse
holder back in its place and reconnect power.
3.2 Fixture linking
You will need a serial data link to run light show of one or more fixtures using a
DMX-512 controller or to run synchronized on two or more fixtures set to a
master/slave operating mode. The combined number of channels required by all the
