Playback
RUNNING IN SOUND-MODE
Action:
1) Press the MUSIC BANK COPY button
until the MUSIC LED turns on.
2) Select the program BANK to run in sound
active mode using the BANK UP/DOWN
buttons.
3) Alternatively you can press a single
CHASE button (1~6) or several CHASE
buttons in sequence and all selected chases
will loop in the order selected.
4) You can adjust the duration time using
the FADE TIME fader.
Notes:
In the Sound mode, programs will be
triggered by the sound using its built-in
microphone.
Multiple chases selected will loop and run
in the order originally selected.
RUNNING IN AUTO-MODE
Action:
1) Press the AUTO DEL button until the
AUTO LED turns on.
2) If a CHASE button is not pressed the
controller will automatically run a BANK
program.
3) Change BANK programs by using BANK
UP/DOWN buttons.
4) Alternatively you can press a single
CHASE button (1~6) or several CHASE
buttons in sequence and all selected chases
will loop in the order selected.
5) You can adjust the time between steps by
moving the SPEED fader and the duration
of the step by moving
the FADE TIME fader.
Notes:
In the Auto mode, programs will be
triggered by controllers fade and speed
time as set on the faders.
Multiple chases selected will loop and run
in the order originally selected.
RUN MULTIPLE CHASES
SIMULTANEOUSLY
Action:
1) Press and hold AUTO DEL button.
2) While holding down AUTO DEL, in
succession press and release each CHASE
you would like to run simultaneously.
Notes:
IMPORTANT!
To avoid conflict between
scenes running simultaneously that control
the same fixture attributes consider
creating individual color and gobo chases.
BLACKOUT
The Blackout button brings all lighting
output to O or off.
Midi Operation
The controller will only respond to MID
I commands on the MIDI channel which
it is set to full stop. All MIDI control is
performed using Note on commands. All
other MIDI instructions are ignored. To
stop a chase, send the blackout on note.
Action:
1 )Press and hold the MIDI/REC button for
about 3 seconds.
2) Select the MIDI control channel (1~16) via
the BANK UP/DOWN buttons to set.
3) Press and hold the MIDI/REC button for
3 seconds to save settings.
4) To release MIDI control, press any other
button except the BANK buttons during
step 2.
Notes:
This is the Channel that the controller will
receive MIDI note commands.
240A DMX CONTROLLER 240ch 2019
•
Art No F9000382
