5.5 Manual control
This interface is used to control the current lamp, and at the same time automatically
enter the host state (do not receive DMX signal, send DMX signal to the bus to the slave).
The manual menu will display 8 channels according to the standard 8 channels set in the
setup menu.
Options
Explain
1CH. Dimming
0-255
Press the ‚OK’ key to enter the edit state. At this time,
select the hundreds place and press the „Up” and
„Down” keys to change the channel value. Press the
„OK” button again to select the ten digits for editing.
Press again to exit edit state
....
0-255
8CH. Zoom
0-255
9CH. Reset
0-255
5.6 Set up
Options
Explain
Operating
mode
DMX
Slave status: Receive DMX signal from
console or host
Auto 1
Master status: self-propelled and send DMX
signal to slave
Auto 2
Random
Sound
Program
Scene Run
Auto, Colse,
Scene 20, Scene
19... 1
Scene Set
Scene Save, Scene Select (1-20) Scene Time, AutoRun (On/Off),
Dimmer, Shutter, Color, Gobo, Roto Gobo RT, Gobo Anim, Focus,
Zoom
DMX Address 1-512
Channel Mode 9 CH
DMX Signall
Keep/Clear
Display
On/Off
Linear Color
On/Off
Load Default
On/Cancel
LED LOGO PROJECTOR 300W IP65 ANIMATION EFFECT
•
Art No F7300256
