LED Moving Head WASH 19x15W RGBW 4w1 ZOOM Osram MK2 F7000530
www.flash-butrym.pl
7
DMX-512 connection with DMX terminator:
For installations where the DMX cable has to run a long distance or is in an electrically noisy environment,
such as in a discotheque, it is recommended to use a OMX terminator. This helps in preventing corruption
of the digital control signal by electrical noise. The OMX terminator is simply an XLR plug with a 120 Q
resistor connected between pins 2 and 3, which is then plugged into the output XLR socket of the iast fixture
in the chain. Please see illustrations below.
5.1
Voltage specification
Input Voltage
Total Power
Frequency
90~260V
280W
50/60Hz
5.2
Connecting power supply
The connection is performed using power cable with PowerCon connector (included).
The device must be operated by qualified personnel. Make sure that the power grid supply parameters are
consistent with device parameters and limitations are not exceeded.