Flash F7000499, User Manual

Page: 3 / 7

www.flash-butrym.pl
2
1 INTRODUCTION
Thank you for purchasing LED Moving Head 30W SPOT COLOR GOBO. For safety reasons and to ensure
the trouble-free operation, carefully read the instructions.
2 SAFETY INFORMATION
1. Installation should be done by qualified personnel in order to minimize the risk of accidental
electric shock
2. Disconnect the power supply before installation.
3. Before connecting the unit to the mains, make sure it is not damaged mechanically. If you
notice any signs of damage you should contact your dealer immediately. Do not connect the
device to the mains.
4. Do not use the device in high humidity conditions and at temperatures above 40° C
5. The device must be installed on stable structures.
3 MAINTENANCE
1. For good ventilation regularly clean the fan and the fan cover
2. In order to prevent electronic components overheating do not turn on the device for 20
minutes after turning off.
4 PRODUCT INFORMATION
4.1 Specification

Power supply voltage: 110 - 240V

Voltage frequency: 50/60Hz

Diode type: Standard LED

Number of diodes: 1

Diode power: 30W

Display: LED - 4 characters

Color: Color wheel - 7 white

Dimming: Linear: 0 - 100%

GOBO wheel: 7 pa open

PAN range: 630°

TILT range: 180°

Number of DMX channels: 4 / 12

DMX standard: DMX 512

Control interface: 4 buttons

AC IN: IEC 320 - C14

DMX IN: XLR - 3 pin

DMX OUT: XLR - 3 pin

Cooling: Active

Height [cm]: 32,5

Width [cm]: 25

Depth [cm]: 27

Weight [kg]: 2,5