PAD-1000
Wireless Broadband Modem User Guide
Page 8
ü
STEP 2 COMPLETE (ETHERNET ONLY)-
YOUR MODEM IS NOW
READY TO CONNECT, BUT ONLY THROUGH THE ETHERNET
CABLE. IF YOU WISH TO CONNECT THROUGH THE USB CABLE,
ADDITIONAL STEPS ARE REQUIRED (SEE BELOW).
For USB Connections Only (Ethernet Connections do not apply)
When you first connect using the USB cable, the “Found New Hardware"
message appears as Windows attempts to install the appropriate Drivers (this is
not applicable for Ethernet connections). Each Windows operating system has
slightly different steps for the USB Driver install. For example, you may need to
have your original Windows operating system CD-ROM on hand if you utilize
Windows 98 SE or ME applications.
Windows® 98 SE/Windows ME (through USB cable only)
The wizard detects the modem.
1. When the "Welcome to the Found New Hardware Wizard" appears,
if prompted, insert your original operating system CD-ROM into the
CD-ROM drive. The CD-ROM would have been included in your
original Windows packaging.
2. Select the option to install the software automatically
(recommended) or to install from a specific location (advanced).
Then click “Next.”
3. From the “Completing the Found New Hardware Wizard” page, click
“Finish.”
If prompted, restart your PC. The driver installation is now
complete for Windows 98 SE/ ME users.
Windows® 2000/Windows XP (through USB cable only)
The wizard detects the Wireless Broadband Modem.
1.
When the “Hardware Installation” page (for XP users) or “Digital
Signature Not Found” page (for 2000 users) appears, click
“Continue Anyway” or “Yes.”
Figure 4, Hardware
Installation (XP)