Installation items:
The factory only provides the main unit and the water unit; the other items in the illustration
are necessary spare parts for the water system ,that provided by users or the installer.
3.1 Installation illustration
Attention:
Please follow these steps when using for the first time
1.Open valve and charge water.
2.Make sure that the pump and the water-in pipe have been filled with water.
3.Close the valve and start the unit.
3.INSTALLATION AND CONNECTION
4
Chlorinator cell
Water outle t
Pool
Valve
Water
supply
Water inlet
Water pump
Sand fil ter
(or other type fil ter)
4.3 How to choose Mode
Cooling mode
Heating mode
M
M
◎ Press “ M ” to choose mode(mode can be changed under running)
◎ Press “ ” to power on unit. Under running, the LCD displays the water setting temp,
water-out temp and current mode.
◎ Press ” to set temp. 1 degree higher, press ” to set temp. 1 degree lower.
4.4 How to know the current status?
Water
outlet
temp.
Ambient
temp.
compressor
exhaust temp.
M
M
M
Condenser
temp.
◎
Under running, press 3s to check the current status of the
unit. You can check water-out/ambient/compressor/condenser
temperature. If no buttons are depressed within 10 seconds,
the LCD will display water-setting/water-out temp.
When the unit is switched off, current water-out temperature
is displayed.
M
4. USAGE AND OPERATION
9
AUX
parameter 9
Mode: 0(heating only)
1(
cooling and heating)
2(heating only)
factory setting: 1
parameter
08
automatic restarting (0/1)
factory setting: 1
water pump mode:
0: already open
1: 30s start before compressor start
30s stop after compressor stop.
parameter
7
TEMP
SET
TEMP
SET
Con ne ct to po wer sup pl y
