33
REFLECTIVE BACK INSTALLATION
The
Flare
Fireplace may be ordered with a reflective ceramic glass backing. The ceramic glass is tinted black to
create a reflection when the fireplace is running. The ceramic glass will enhance and protect the fireplace look
and is very easy to clean. The reflective back is shipped outside the unit, inside a sleeve with the other glass
panes. It should be mounted at the back of the fireplace, placed in the gap between the fire bed (shown yellow
below) and held by the top mounting brackets (red circle). Place the mirrored side of your reflective panel
facing the fire, with the textured side facing the back of the fireplace.
4. Repeat steps 3 for the other reflective back
holders.
3. Install the RB Holder as shown in the picture
below
2. Move the Reflective back towards the
fireplace back and hold it in place as shown in the
picture below.
1.
Carry the reflective back carefully using the suction
cups and place it with 45 degrees as shown in
picture bellow
