FLAMMA EF172D, Instruction Manual

Page: 29 / 160

29
AUXILIARY ELECTRICIT Y CONSUMPTION:
At nominal heat output (elmax): 12.5 W
At minimum heat output (elmin): 12.0 W
In standby mode (elSB): < 0.5 W
T YPE OF HE AT OUTPUT / ROOM TEMPER ATURE CONTROL
Single stage heat output and no room temperature control No
Two or more manual stages, no room temperature control No
With mechanic thermostat room temperature control No
With electronic room temperature control Yes
Electronic room temperature control plus day timer Yes
Electronic room temperature control plus week timer Yes
OTHER CONTROL OPTIONS
Room temperature control, with presence detection No
Room temperature control, with open window detection Yes
With distance control option No
With adaptive start control Yes
With working time limitation No
With black bulb sensor No
PARTS AND HARDWARE
• Unpacking the fire carefully, make sure that the appliance is intact with
no signs of damage caused by transport and no part has been exposed
to water. If in doubt, do not use the appliance and contact an authorised
service centre.
• Keep plastic wrapping away from children.
• Save the original packaging as this may be required in the event of service
complaint with product.
• Check that all parts are removed from the packing.
CONTROL BOARD REMOTE CONTROL RECEIVER REMOTE CONTROL TR ANSMIT TER
HARDWARE: RC01-041A01
SOFTWARE: V1
HARDWARE: RF290B V1.2
FREQUENCY: ASK/OOK 433.92 MHz
MA XIMUM TRANSMISSION POWER: 10 mW
HARDWARE: RF290A–TX–V1.3
SOFTWARE: RF290A _C_V0.6.0.hex
EN