ROLLERS REGULATION
•
BELT AND CHAIN TENSION
•
BELT TENSION
•
UNLOCKING THE SAFETY GUARD
7
To change the chain tension you have to move the parts indicated
by the 2 horizontal arrows.
To change the belt tension you have to move the motor up ( to
reduce the tension) or down (to increase the tension).
Fig. 6
The roller gap is obtained by moving the handle on the right or on the left (
Fig. 6).
Each step of the handle on the toothed sector operates a different thickness.
THE ROLLERS CANNOT WORK IF THEY ARE IN CONTACT WITH
EACH OTHER
.
To change the belt tension you have to move the nut indicated by
the arrow.
For unlocking the safety guard move the safety guard in the direction
shown by the horizontal arrow and then move up or down the safety guard
