FLAMENT INNOVATIONS BFP-ICARUS, Manual, Page: 8 / 42

8
9
Filament
Sensor
Detects when filament has
run out and cleans it as it
passes through. This is found
in the control case on the
right side.
10 Casters
Allows the printer to roll or
be locked in place with
retractable feet. The feet
can be raised and lowered
by rotating the leveling feet.
11 Switch Panel
Controls the printer power:
See the
Powering the Printer
On section to see what
each control does.
12 Control Case
Houses all of the electronics
for the printer. This includes
power supply, duet board,
relays, and cooling fans.
13
Duet 2 Wifi
Screen
The interface used to
interact with the printer.
14
Heated Bed
Indicator
Red indicator light that turns
on when the heated bed is
above 40C. The PEI Print
Plate should not be
removed if this light is on
15
Hotend
Indicator
Red indicator light that turns
on when the hotend is
above 40C.
10
9
15
5
12
11
13
1
14