FLAMENT INNOVATIONS BFP-ICARUS, Manual, Page: 5 / 42

5
Quick Start Guide
The following guide allows you to check and monitor the progress of
setting up your ICARUS unit. It is recommended to check each step off
here to ensure everything is done in order and correctly.
1. Remove the four L-brackets from the bottom of the printer that attach
it to the crate. Adjust the casters, so the wheels are on the pallet.
2. Remove the machine from the pallet by gently rolling it off and move
the machine to the general area where it will be used.
3. Remove the shrink wrap from the machine and open the main door.
Inside the printer. Please remove your included filament and any other
boxes you see. Check under the blue bearing plate for boxes.
4. Level the machine using the included bubble level in the toolbox
(located inside the machine at the time of shipping).
5. Plug the 110VAC cord into the wall which is located on the rear right of
the unit, twist the red emergency stop clockwise to disengage it, and
flip the red toggle switch. The unit should now be powered on.
6. From the touch screen, temporarily disable to WiFi by pressing:
Console > Keyboard Icon > Type “M552 S0” > Enter
Note: This step is not relevant if you have the CAT5/6 version.
7. From the touch screen, select and run the following macro by pressing
the Macro button:
Macro > “Bed Leveling” > “ Mesh Bed Leveling - RT ”
8. Connect to a Wifi Network (page 21). Check that you can connect to
the Duet Web Control interface afterward (detailed in this manual).
Install the webcam, if desired, following the instructions from the Wyze
Cam app on your phone or tablet.
9. Install the slicer profiles from the website and – HAPPY PRINTING