Insert the backup battery before connecting the unit to your modular rack
The PANMIX module uses a standard 3v lithium backup battery, type CR2032. Insert the provided
battery or a comparable battery into the battery compartment as shown below. The battery is needed
to keep recordings and settings stored when the Eurorack case is turned off.
Make sure the anode (+) points outwards ! Otherwise you destroy the SRAM !
2.3 Module backside
5
Socket for backup battery
3V Typ CR2032
Switches for input levels
- Modular level CV or Audio (default)
- Position AUDIO: +6db Audio line level (only audio!)
At the bottom of the module there are two slide switches for setting the input level of the panning
mixer inputs (A + B). The switch position AUDIO means that the input can be used as an audio input
with + 6dB gain for external line level. In this case, the input can not be used as a CV input. In the
other switch position, the module CV or Audio processes levels of +/- 5v (modular level).
In addition there are the socket for the backup battery of the memory.
Please note the information below!
channel A
channel B
