19
8. MENU X-OUT
Call MENU X-OUT:
Push down Key SHIFT and Key “G”)
Call SubMenus and set values:
Toggle between Submenu selection and value selection: Push data-entry-knob
Blink Submenu ON: you select the submenu of your choise by turning the data-entryknob
Blinking OFF: you select the parameter of your choise by turning the data-entryknob
.
Following values are possible for each x-out:
SEQ-P01..P63
- 16-step preset sequence pattern
CLOCK
- Clockdivider value (intern or extern MIDI clock)
GATE
- Gatetime of the steps
Sequence pattern P02 switch OFF the X-out channel (all steps off).
Start/Stop sequencer with key PLAYMODE (only with internal clock - Sync=intern)
GATE
GATE is the time between Note-On and Note-Off.
The GATE time values are adapted in relation to the Clock of the sequence (“adapted”).
Following values are allways definitely:
adapted: 1
GATE time is allways the time of 1 tick.
adapted: 8
GATE time is allways the time of value CLOCK of the sequence.
With “adapted:8” you can play notes
without note off (bonded):