24
ENG
Installation and user manual
4.8.4 “FAN” - FANSPEED
The fan can be used at two speeds
Switching on the
“
FAN
”
function
•
Select “FAN” function and press “OK”. The display shows
“SP1”.
•
Press “+” or “-” to define the fan speed:
–
“SP1” : fan speed 1 (low air volume)
–
“SP2” : fan speed 2 (high air volume)
•
Press “OK”.
4.8.5 “DUCT” - USE OF DUCTS
Switching on the
“
Duct
”
function
•
Select “Duct” function and press “OK”. The display shows “dOFF”.
•
Press “+” or “-” to define the use of ducts:
–
“dOFF” : installation without ducts
–
“dON” : installation with ducts
•
Press “OK”.
4.8.6 “PURG” - DRAIN
The “Purg” function can be used to drain air from the system.
Switching on the
“
Purg
”
function.
•
Call up the “Purg” function and press “OK”. The pump is switched on.
The display indicates the time remaining until the draining procedure is
complete (in minutes). After 5 minutes, the appliance reverts to the previously
selected operating mode.
4.8.7 “FSET” - DEFAULT SETTINGS
The “Fset” function can be used to restore the default settings.
Switching on the
“
Fset
”
function
•
Call up the “Fset” function and press “OK”. The display shows “Fset”.
•
Press “OK”. After 10 seconds, the default settings are restored
am
pm
auto
man
prog
kWh
1 2 3 4 5 6 7
0
6
12
18
24
am
pm
auto
man
prog
kWh
1 2 3 4 5 6 7
0
6
12
18
24
am
pm
auto
man
prog
kWh
1 2 3 4 5 6 7
0
6
12
18
24
am
pm
auto
man
prog
kWh
1 2 3 4 5 6 7
0
6
12
18
24
