We reserve the right to change designs and technical specifications of our products.
7
ENG
2. Commissioning mode
Battery gateways always start in installation mode during commissioning (connecting the power supply).
Installation mode means:
▶ Alle Telegramme werden sofort weitergeleitet.
▶ Das Gerät bleibt für 30 Minuten aktiv.
▶ Der Installationsmodus kann per MQTT-Befehl verlängert bzw. eine Dauer angegeben werden.
Note:
▶ There is no installation mode for devices with mains voltage.
▶ If there is no white list for the meters, all data is saved and forwarded immediately.
▶ The transmission interval for the meter data transmission can be controlled via the white list.
2.1 Commissioning Smart Node with power supply unit
1
Opening the housing
Unscrew the four screws on the cover to open the cover.
2
Mounting the device
The housing has four slotted holes for oval-head screws.
For mounting on walls, we recommend screws with a diameter of 5 mm and a length of at
least 25 mm and matching rawl plugs, as well as washers with an external diameter of 10 mm.
3
Inserting the SIM card
This step is optional because all of our devices are delivered with a SIM card.
It is possible to replace this with your own card at any time.
4
Power supply
Connect the power supply unit to the power supply.
Caution: Danger to life!
Only switch on when the power supply is switched off.
5
Switching on
After switching on, the gateway connects to the server via the network (GSM/Wi-Fi). The
connection process usually takes no longer than 90 seconds. The network connection can be
checked via the status LED.
6
Closing the housing
Close and seal the housing using the four screws.
