© 2018 Flamco group. All rights reserved.
We reserve the right to change designs and technical specifications of our products.
Errors and omissions excepted.
Rev 1.0 Aug-18
Page
4
/
44
Customer Details
Please fill in information future reference:
Company:
Contact:
Address:
Tel No:
Fax No:
Post Code:
E-mail:
Equipment Details
Details of model and serial number may be found on the label
Model:
Serial No:
Purchase date:
Purchase From:
Note:
It is highly recommended to have this equipment commissioned by a Flamco trained engineer. Any damage or
loss incurred through incorrect commissioning by an unapproved engineer will not be covered by the warranty.
If you wish for Flamco to arrange commissioning or service please contact us.
Telephone:
+44 (0)1744 744 744
Email:
Important:
When installing an expansion vessel with the pressurisation unit ensure the expansion vessel gas pre-charge is
the same as the required cold fill pressure for the system.
