manualshive.com logo in svg

flamco MeiTronic RCD2, Manual, Page: 20 / 28

Share
Download
flamco MeiTronic RCD2 Manual Download Page 20

20

 Instructions for use

EN

LOCKING SETTINGS 

AND BUTTONS

By locking settings, access to individual parameter groups is disabled. Only unlocked 

parameter groups are visible. Locked settings can be temporarily unlocked by pressing 

the button   for 20 seconds, while we are in the last unlocked setting group.

Parameter S1.9 determines which settings groups are locked: 

S1.9=0 - no lock,

S1.9=1

 - group S1 is locked,

S1.9=2 - groups P1, P2 and S1 are locked.

LOCKING SETTINGS

LOCKING SETTINGS

By locking keys, we limit or disable unrequested settings or activation of functions. 

Buttons are locked by pressing the button   for 10 seconds, and unlocked by pressing 

the button   for 10 seconds.

Parameter S1.10 determines the extent of locking buttons:

S1.10=0 

- no lock,

S1.10=1 - type of operation for rooms and sanitary water is locked,

S1.10=2 - same as 1, but adds the lock of Party, Eco, d.h. w., and Fireplace functions.

S1.10=3 - same as 2, but adds the lock of requested temperatures,

S1.10=4 - same as 3, but adds the lock of browsing of info displays and additional ser-

vice settings.

When the buttons are locked, the symbol   appears in basic display.

Summary of Contents for MeiTronic RCD2





























Reviews:

No comments