flamco LogoTronic HIU V2, Operating Instructions Manual

Page: 6 / 197

LogoTronic HIU Controller für LogoMatic G2
6
2. Description
2.1 Technical data
Model LogoTronic HIU controller V2
Power supply 200 – 240VAC, 50 – 60Hz
Power consumption 5W (power adapter with electronics) +
external consumers (pumps, valves)
Internal fuse 2A delay
Theory of operation Type I
Degree of contamination II
Overvoltage category II
Permissible ambient conditions
in operation 0 °C – 40 °C, maximum 85% relative air humidity
at 25 °C
in transport/storage 0 °C – 70 °C, no condensation permitted
Housing 3-part, plastic polycarbonate / ABS
Dimensions 250 mm x 175 mm x 48 mm
Display 5 LED
Operation 2 keys for service personnel and controlled
by app
2.2 About the controller
The LogoTronic HIU controller V2 was developed to control heat interface units (HIU) in heating
networks. The controller is not a finished product but is instead supplied installed and prewired
as a component of a heat interface unit.
The controller is designed solely for installation in a finished product (heater) and is supplied
solely to manufacturers of heating products.
If the controller is installed outside the heating equipment, corresponding tensile loads on the
cables must be taken into account.