We reserve the right to change designs and technical specifications of our products.
9
ENG
5. Servicing
The equipment must be disconnected from mains power before any servicing is carried out!
5.1 Fuse
A safety fuse is installed. The fuse installed is a 2A delayed fuse. The fuse type is: Glass fuse 5x 20 mm.
Fuses may be changed only by specialist personnel once the equipment has been disconnected from
mains power.
6. LogoTronic Hub OTC – operation
6.1 Configuration
(shown without front cover)
Mains connection device
(L, N, PE): see also Chapter 3.1 Item (A)
The module has a built-in power supply unit and is supplied by it. The mains connection device must
therefore be 230V / 50Hz. This voltage is also switched through the output relays.
USB
Key -A-
RTC battery
LED 1...5
Key -B-
