5
ENG
3. Re-fit the plug
(M)
and the cap
(L)
.
4. Re-open the water pipe.
5. Check the seals.
3. Maintenance
Keep this manual close to the expansion vessel. Flamco provides a 5-year warranty on the
condition that the Airfix expansion vessel is serviced by a qualified installer each year. The
annual service must be documented by the installer carrying out the maintenance on the
relevant pages at the end of this manual.
Should water escape from the safety valve, proceed as follows:
Check the outward condition of the vessel for damage or corrosion.
Check the gas pre-charge and, if necessary, set to the correct pressure as follows:
Shut off the water supply
(K)
or AirfixControl
(D)
and drain the Airfix D.
Set the pre-pressure:
See under first use.
Open the water supply to the Airfix D:
See under first use.
4. De-installation
1. Shut off the water supply
(K)
or AirfixControl
(D)
and drain the Airfix D.
2. Remove the cap
(L)
and the plug
(M)
.
3. Remove pressure
(P)
from the Airfix D at the gas top-up valve (S).
4. Unscrew the Airfix D
(A)
.
Caution
Be careful, the weight of the vessel may be greater than expected, as it may be filled with water!
Caution
The water in the Airfix D may be hot!
Environment
Dispose of the Airfix D in compliance with local regulations.
Summary of Contents for Airfix D
Page 3: ......
