Flaircomm Technologies BLUETONE BTHF102, User Manual, Page: 11 / 17

BlueTone
TM
BTHF102/202 User Manual
. 11
2.4.3 Erase all paired profiles
This handsfree can paired with up to 8 Bluetooth equipments. When Handsfree in the Paring Mode, long press K4,
it will erase all paired profiles and quit pairing mode. At this time, Blue LED gives 1 blink per 3 seconds.
2.4.4 Connecting/Disconnecting your Handsfree with Bluetooth Equipment
When working with a bluetooth equipment using HFP, your handsfree cannot communicate with the equipment
without bluetooth connection established in advance.
Connecting your Handsfree with Bluetooth Handset
：
Bluetooth connection can be set up by initiating request from either the handsfree or the handset, detailed
operations are as follows:
1. Initiating connection request from the Handsfree: Place the handsfree close to the Bluetooth handset and then
short press K2.
2. Initiating connection request from the Bluetooth handset: Place the handsfree close to the Bluetooth handset
and then follow the handset user guide to find the handsfree and send connection request.
After connecting, you will hear a connecting tone, and then Blue LED gives 3 quick blinks per 2 seconds
Disconnecting your Handsfree with Bluetooth Handset:
When handsfree connected with bluetooth handset, you can disconnect them as follows:
1. Long press K2.
2. Refer to handset’s manual to initiate the connection from the handset side.
After disconnecting, you will hear a disconnecting tone, and then Blue LED gives 1 blink per 3 seconds.
2.5 Call Functions
2.5.1 Call
Before dialing, both your handsfree and handset must be power on. And you also need to ensure your handsfree
and handset has been linked with Bluetooth connection.
Answer Call: Short press K2.
Reject Call: Long press K4.
End Call: Short press K2.
Redial: Long press K3.
2.5.2 Adjusting Handsfree Volume
In the talking mode
，
you can short press K3/K4 to increase/decrease your speaker volume. You can repeat the
above operation to speaker volume to a desirable level.
Note
：
For most Bluetooth headset, handsfree volume control will synchronize with the handset. That is, your
handsfree volume can also be controlled your handset, vice versa. However, this may not be always true due to
variations on handset implementations chosen by different manufactures.