Flaircomm Technologies BlueTone BTHF080 User Manual Download Page 3

                                                                           BlueTone™

 

BTHF080 User Manual 

 

 

Certification and Safety Approvals 

This product has been tested and found to comply with part 15 of FCC rules, R&TTE Directive

99/5/EC

 

or CE marked requirements.  

Warning

Users should not make changes or modify the device in any way. Changes or modifications 

without expressly approved by the party responsible for compliance could void the user’s authority to 

operate the device. 

 

 

 

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) 

This device may not cause harmful interference, and (2) this device must accept any interference received, 

including interference that may cause undesired operation. 

 

 

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT 

This equipment has been tested and found to comply with the limits for a Class B digital device,  pursuant to 

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful 

interference in a residential installation. This equipment generates, uses and can radiate radio frequency 

energy and, if not installed and used in accordance with the instructions, may cause harmful interference to 

radio communications. However, there is no guarantee that interference will not occur in a particular 

installation. If this equipment does cause harmful interference to radio or television reception, which can be 

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by 

one or more of the following measures: 

-Reorient or relocate the receiving antenna. 

-Increase the separation between the equipment and receiver. 

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 

-Consult the dealer or an experienced radio/ TV technician for help. 

CAUTION: 

Any changes or modifications not expressly approved by the grantee of this device could void the user's 

authority to operate the equipment. 

 

RF exposure warning  ·       

The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment. 

The equipment must not be co-located or operating in conjunction with any other antenna or transmitter. 

 

   3  

 

 

Summary of Contents for BlueTone BTHF080
















Reviews: