FLAIG TE NEO-LIFT 1000, Operating And Maintenance Instructions Manual

Page: 9 / 19

Operating and maintenance instructions for models NEO-LIFT
9
WORKLOAD LIMIT FOR PLATES AND ROUNDS (St37):
NEO-LIFT 250 Airgap < 0,1mm Airgap 0,1 - 0,3 mm Airgap 0,3 - 0,5 mm
Steel thickness
(mm)
Max.
L
(mm)
Max.
W
(mm)
Max.
load
(kg)
Max.
L
(mm)
Max.
W
(mm)
Max.
load
(kg)
Max.
L
(mm)
Max.
W
(mm)
Max.
load
(kg)
>= 25 2250 1000 250 2000 1000 170 1500 1000 105
>= 15 2250 1000 205 2000 1000 150 1500 1000 90
>= 10 2250 1000 170 2000 1000 130 1500 1000 85
>= 6 1750 1000 100 1500 1000 80 1350 1000 60
>= 4 1600 1000 50 1400 1000 45 1000 1000 36
Ø50 - Ø200mm 3500 - 125 3000 - 100 2500 - 70
NEO-LIFT 500 Airgap < 0,1mm Airgap 0,1 - 0,3 mm Airgap 0,3 - 0,5 mm
Steel thickness
(mm)
Max.
L
(mm)
Max.
W
(mm)
Max.
load
(kg)
Max.
L
(mm)
Max.
W
(mm)
Max.
load
(kg)
Max.
L
(mm)
Max.
W
(mm)
Max.
load
(kg)
>= 30 2500 1500 500 2350 1250 380 2150 1000 255
>= 20 2500 1500 425 2350 1250 320 2150 1000 220
>= 15 2500 1500 400 2350 1250 300 2150 1000 205
>= 10 2500 1500 270 2350 1250 220 2150 1000 165
>= 8 2300 1500 195 2250 1250 160 2000 1000 125
>= 6 2000 1500 125 2000 1250 100 2000 1000 80
Ø65 - Ø270mm 4000 - 250 3500 - 200 3000 - 150
NEO-LIFT 1000 Airgap < 0,1mm Airgap 0,1 - 0,3 mm Airgap 0,3 - 0,5 mm
Steel thickness
(mm)
Max.
L
(mm)
Max.
W
(mm)
Max.
load
(kg)
Max.
L
(mm)
Max.
W
(mm)
Max.
load
(kg)
Max.
L
(mm)
Max.
W
(mm)
Max.
load
(kg)
>= 40 3000 1500 1000 3000 1500 845 2500 1250 650
>= 30 3000 1500 860 3000 1500 730 2500 1250 565
>= 25 3000 1500 830 3000 1500 705 2500 1250 550
>= 20 3000 1500 745 3000 1500 640 2500 1250 510
>= 15 3000 1500 500 3000 1500 445 2500 1250 380
>= 10 2750 1500 285 2500 1500 240 2000 1250 200
Ø100 - Ø300mm 4500 - 500 4000 - 400 3500 - 300
NEO-LIFT 1500 Airgap < 0,1mm Airgap 0,1 - 0,3 mm Airgap 0,3 - 0,5 mm
Steel thickness
(mm)
Max.
L
(mm)
Max.
W
(mm)
Max.
load
(kg)
Max.
L
(mm)
Max.
W
(mm)
Max.
load
(kg)
Max.
L
(mm)
Max.
W
(mm)
Max.
load
(kg)
>= 60 3500 2000 1500 3500 2000 1240 2500 2000 975
>= 50 3500 2000 1300 3500 2000 1100 2500 2000 880
>= 30 3500 1500 1000 3500 1500 860 2500 1500 750
>= 20 3000 1500 825 3000 1500 750 2500 1500 675
>= 15 3000 1500 480 3000 1500 450 2500 1500 410
Ø150 - Ø350mm 4500 - 750 4000 - 675 3500 - 600
NEO-LIFT 2000 Airgap < 0,1mm Airgap 0,1 - 0,3 mm Airgap 0,3 - 0,5 mm
Steel thickness
(mm)
Max.
L
(mm)
Max.
W
(mm)
Max.
load
(kg)
Max.
L
(mm)
Max.
W
(mm)
Max.
load
(kg)
Max.
L
(mm)
Max.
W
(mm)
Max.
load
(kg)
>= 60 3500 2000 2000 3500 2000 1650 3000 1500 1300
>= 50 3500 2000 1600 3500 2000 1300 3000 1500 1100
>= 30 3500 2000 1350 3500 2000 1150 2500 1500 1000
>= 20 3000 2000 1100 3000 1500 1000 2500 1500 900
>= 15 3000 1500 650 3000 1500 600 2000 1500 550
Ø150 - Ø350mm 5000 - 1000 4500 - 900 4000 - 800
• Do not lift plates thinner than indicated in the chart.
• When lifting tubes with a thin wall the length may be the limiting factor.
INSPECTION AND MAINTENANCE OF THE LIFTING MAGNET:
• Before each use: Check the entire magnet visually. Brush the pole shoes of the
magnet and the contact surface cl the work piece clean. Ii necessary tile oil any burrs or irregularities. Do
not use the magnet ii you have discovered any detects. Check the operation of the handle and the locking
plate.
• Weekly: Check the entire magnet, including the lifting eye and locking plate for deformations, cracks
or other detects. If the lifting eye is deformed or worn for more than 1U%, it should be replaced Check
the presence and legibility of the type plate and instruction plate. Check the pole shoes. It they are dama
ged (pits, burrs etc.) for more than 10% the magnet should be returned to your supplier or an authorised
agent for regrinding. Lilting capacity is checked following this operation.
• Annually: Have the lifting capacity of your magnet checked by your supplier or an authorised agent at least
once a year.
HORIZONTAL AND VERTICAL HANDLING?
Use the "HV" lift arm, very convenient to turn from horizontal to vertical position and vice-versa. Ask for further
information!
GB
NEO-LIFT 125 Airgap < 0,1mm Airgap 0,1 - 0,3 mm Airgap 0,3 - 0,5 mm
Steel thickness
(mm)
Max.
L
(mm)
Max.
W
(mm)
Max.
load
(kg)
Max.
L
(mm)
Max.
W
(mm)
Max.
load
(kg)
Max.
L
(mm)
Max.
W
(mm)
Max.
load
(kg)
>= 20 1500 1000 125 1250 800 75 1000 600 60
>= 15 1500 1000 115 1250 800 70 1000 600 55
>= 10 1250 1000 110 1000 800 65 750 600 50
>= 4 800 800 45 600 600 40 500 600 30
>= 2 500 500 15 400 500 13 400 500 12
Ø50 - Ø100mm 2500 - 60 2500 - 40 2500 - 25